Miller Spectrum 625 X-TREME Manuel d'utilisateur télécharger pdf (Page 2)

Engine Drive Compatibility

Control Panel

Rated Output

40 A at 140 VDC,

50% duty cycle

Max. Open-

Circuit Voltage

400 VDC

System Weight

With 12 ft (3.7 m) Torch

Net: 21 lb (9.5 kg)

Ship: 37 lb (17.5 kg)

With 20 ft (6.1 m) Torch

Net: 23 lb (10.5 kg)

Ship: 40 lb (18 kg)

Amps Input at Rated Output, 50/60 Hz, 1-Phase

208 V 230 V KVA KW

33 30 6.8 6.6

Specifications (Subject to change without notice.)

Dimensions

H: 9 in (229 mm)

W: 5-1/2 in (140 mm)

D: 13-1/4 in (337 mm)

Plasma

Gas

Air or

Nitrogen

only

Mild Steel Cutting Capability (Thickness to scale.)

Note: Recommended maximum piercing capacity for hand-held applications is 5/16 in (7.9 mm).

Maximum Sever cut of 7/8 in (22.2 mm) at 5 IPM

For aluminum and other metals with high thermal conductivity, cutting capacities may be reduced as much as 30%.

5/8 in (15.9 mm) at 12 IPM

Rated cut capacity is based on traveling approximately 12 inches per minute to achieve a steady, precise

cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.

1/4 in (6.4 mm) at 60 IPM

Rated

Equipment Generator Power Steel Quality Cut (Approximate) Spectrum Output Amp Setting

Bobcat

™

250, Trailblazer

302 & 275 DC 11 kW 5/8 in 40 A, 240 V, full KVA plug

Bobcat

™

225 10.5 kW 5/8 in 40 A, 240 V, full KVA plug

PipePro

304, PRO 300 12 kW 5/8 in 40 A, 240 V, full KVA plug

Big 40

CC/CV Deluxe Model 12 kW 5/8 in 40 A, 240 V, full KVA plug*

Big Blue

500 CC/CV Deluxe Model 12 kW 5/8 in 40 A, 240 V, full KVA plug*

DC Plasma Cutting System

Mild Steel Recommended Cut Speeds

Travel speeds are approximately 80% of maximum.

Thickness Approximate Travel Speeds*

1/8 (3.2 mm) 149 IPM (3785 mm/min)

1/4 in (6.4 mm) 60 IPM (1524 mm/min)

3/8 in (9.5 mm) 34 IPM (864 mm/min)

1/2 in (12.7 mm) 21 IPM (533 mm/min)

5/8 in (15.9 mm) 12 IPM (305 mm/min)

1. Status and Troubleshooting Lights

2. Output Control

*Must derate if on standard models with only 5.5 kw peak.

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Miller Spectrum 625 X-TREME Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Système de soudage Miller Spectrum 625 X-TREME